Here are the answers with discussion for yesterday’s quiz. The information provided should help you work out why you missed a question or three! If you haven’t already done the Quiz from yesterday then have a go at it before you read the answers. I hope this helps you develop an understanding of modern monetary theory (MMT) and its application to macroeconomic thinking. Comments as usual welcome, especially if I have made an error.
It is common to use the term deleveraging to describe the reduction in indebtedness for a particular sector or group in the economy. In most nations at present, both the government and the private domestic sectors are carrying historically large debt ratios. However, under current public sector debt-issuance arrangements and given the national accounting relations, only one of these sectors can reduce its debt level at a time.
The answer is False.
For the answer to be false we need to find a situation where the government and private domestic sectors can run surpluses simultaneously and thus run down debt levels.
So this is a question about the sectoral balances – the government budget balance, the external balance and the private domestic balance – that have to always add to zero because they are derived as an accounting identity from the national accounts. The balances reflect the underlying economic behaviour in each sector which is interdependent – given this is a macroeconomic system we are considering.
To refresh your memory the balances are derived as follows. The basic income-expenditure model in macroeconomics can be viewed in (at least) two ways: (a) from the perspective of the sources of spending; and (b) from the perspective of the uses of the income produced. Bringing these two perspectives (of the same thing) together generates the sectoral balances.
From the sources perspective we write:
GDP = C + I + G + (X – M)
which says that total national income (GDP) is the sum of total final consumption spending (C), total private investment (I), total government spending (G) and net exports (X – M).
From the uses perspective, national income (GDP) can be used for:
GDP = C + S + T
which says that GDP (income) ultimately comes back to households who consume (C), save (S) or pay taxes (T) with it once all the distributions are made.
Equating these two perspectives we get:
C + S + T = GDP = C + I + G + (X – M)
So after simplification (but obeying the equation) we get the sectoral balances view of the national accounts.
(I – S) + (G – T) + (X – M) = 0
That is the three balances have to sum to zero.
You can also write this as:
(S – I) + (T – G) = (X – M)
Which gives an easier interpretation (especially in relation to this question).
The sectoral balances derived are:
- The private domestic balance (S – I) – positive if in surplus, negative if in deficit.
- The Budget balance (T – G) – positive if in surplus, negative if in deficit.
- The Current Account balance (X – M) – positive if in surplus, negative if in deficit.
These balances are usually expressed as a per cent of GDP but that doesn’t alter the accounting rules that they sum to zero, it just means the balance to GDP ratios sum to zero.
Using this version of the sectoral balance framework:
(S – I) + (T – G) = (X – M)
So the domestic balance (left-hand side) – which is the sum of the private domestic sector and the government sector equals the external balance.
For the left-hand side of the equation to be positive (that is, in surplus overall) and the individual sectoral components to be in surplus overall, the right-hand side has to be positive (that is, an external surplus) and of sufficient magnitude.
This is also a basic rule derived from the national accounts and has to apply at all times.
The following graph and accompanying table shows a 8-period sequence where for the first four years the nation is running an external deficit (2 per cent of GDP) and for the last four year the external sector is in surplus (2 per cent of GDP).
For the question to be true we should never see the government surplus (T – G > 0) and the private domestic surplus (S – I > 0) simultaneously occurring – which in the terms of the graph will be the green and navy bars being above the zero line together.
You see that in the first four periods that never occurs which tells you that when there is an external deficit (X – M < 0) the private domestic and government sectors cannot simultaneously run surpluses, no matter how hard they might try. The income adjustments will always force one or both of the sectors into deficit.
The sum of the private domestic surplus and government surplus has to equal the external surplus. So that condition defines the situations when the private domestic sector and the government sector can simultaneously pay back debt.
It is only in Period 5 that we see the condition satisfied (see red circle).
That is because the private and government balances (both surpluses) exactly equal the external surplus.
If the private domestic sector tried to push for higher saving overall (say in Period 6), national income would fall (because overall spending fell) and the government surplus would vanish as the automatic stabilisers responded with lower tax revenue and higher welfare payments.
Periods 7 and 8 show what happens when the private domestic sector runs deficits with an external surplus. The combination of the external surplus and the private domestic deficit adding to demand drives the automatic stabilisers to push the government budget into further surplus as economic activity is high. But this growth scenario is unsustainable because it implies an increasing level of indebtedness overall for the private domestic sector which has finite limits. Eventually, that sector will seek to stabilise its balance sheet (which means households and firms will start to save overall). That would reduce domestic income and the budget would move back into deficit (or a smaller surplus) depending on the size of the external surplus.
So what is the economics that underpin these different situations?
If the nation is running an external deficit it means that the contribution to aggregate demand from the external sector is negative – that is net drain of spending – dragging output down.
The external deficit also means that foreigners are increasing financial claims denominated in the local currency. Given that exports represent a real cost and imports a real benefit, the motivation for a nation running a net exports surplus (the exporting nation in this case) must be to accumulate financial claims (assets) denominated in the currency of the nation running the external deficit.
A fiscal surplus also means the government is spending less than it is “earning” and that puts a drag on aggregate demand and constrains the ability of the economy to grow.
In these circumstances, for income to be stable, the private domestic sector has to spend more than they earn.
You can see this by going back to the aggregate demand relations above. For those who like simple algebra we can manipulate the aggregate demand model to see this more clearly.
Y = GDP = C + I + G + (X – M)
which says that the total national income (Y or GDP) is the sum of total final consumption spending (C), total private investment (I), total government spending (G) and net exports (X – M).
So if the G is spending less than it is “earning” and the external sector is adding less income (X) than it is absorbing spending (M), then the other spending components must be greater than total income.
Only when the government budget deficit supports aggregate demand at income levels which permit the private sector to save out of that income will the latter achieve its desired outcome. At this point, income and employment growth are maximised and private debt levels will be stable.
The following blogs may be of further interest to you:
- Barnaby, better to walk before we run
- Stock-flow consistent macro models
- Norway and sectoral balances
- The OECD is at it again!
Workers can enjoy a stable share of GDP over time if they secure wage increases in line with the growth in their contribution to production.
The answer is False.
The share the workers get of GDP (National Income) is called the “wage share”. Their contribution to production is labour productivity.
The wage share in nominal GDP is expressed as the total wage bill as a percentage of nominal GDP. Economists differentiate between nominal GDP ($GDP), which is total output produced at market prices and real GDP (GDP), which is the actual physical equivalent of the nominal GDP. We will come back to that distinction soon.
To compute the wage share we need to consider total labour costs in production and the flow of production ($GDP) each period.
Employment (L) is a stock and is measured in persons (averaged over some period like a month or a quarter or a year.
The wage bill is a flow and is the product of total employment (L) and the average wage (w) prevailing at any point in time. Stocks (L) become flows if it is multiplied by a flow variable (W). So the wage bill is the total labour costs in production per period.
So the wage bill = W.L
The wage share is just the total labour costs expressed as a proportion of $GDP – (W.L)/$GDP in nominal terms, usually expressed as a percentage. We can actually break this down further.
Labour productivity (LP) is the units of real GDP per person employed per period. Using the symbols already defined this can be written as:
LP = GDP/L
so it tells us what real output (GDP) each labour unit that is added to production produces on average.
We can also define another term that is regularly used in the media – the real wage – which is the purchasing power equivalent on the nominal wage that workers get paid each period. To compute the real wage we need to consider two variables: (a) the nominal wage (W) and the aggregate price level (P).
We might consider the aggregate price level to be measured by the consumer price index (CPI) although there are huge debates about that. But in a sense, this macroeconomic price level doesn’t exist but represents some abstract measure of the general movement in all prices in the economy.
Macroeconomics is hard to learn because it involves these abstract variables that are never observed – like the price level, like “the interest rate” etc. They are just stylisations of the general tendency of all the different prices and interest rates.
Now the nominal wage (W) – that is paid by employers to workers is determined in the labour market – by the contract of employment between the worker and the employer. The price level (P) is determined in the goods market – by the interaction of total supply of output and aggregate demand for that output although there are complex models of firm price setting that use cost-plus mark-up formulas with demand just determining volume sold. We shouldn’t get into those debates here.
The inflation rate is just the continuous growth in the price level (P). A once-off adjustment in the price level is not considered by economists to constitute inflation.
So the real wage (w) tells us what volume of real goods and services the nominal wage (W) will be able to command and is obviously influenced by the level of W and the price level. For a given W, the lower is P the greater the purchasing power of the nominal wage and so the higher is the real wage (w).
We write the real wage (w) as W/P. So if W = 10 and P = 1, then the real wage (w) = 10 meaning that the current wage will buy 10 units of real output. If P rose to 2 then w = 5, meaning the real wage was now cut by one-half.
Nominal GDP ($GDP) can be written as P.GDP, where the P values the real physical output.
Now if you put of these concepts together you get an interesting framework. To help you follow the logic here are the terms developed and be careful not to confuse $GDP (nominal) with GDP (real):
- Wage share = (W.L)/$GDP
- Nominal GDP: $GDP = P.GDP
- Labour productivity: LP = GDP/L
- Real wage: w = W/P
By substituting the expression for Nominal GDP into the wage share measure we get:
Wage share = (W.L)/P.GDP
In this area of economics, we often look for alternative way to write this expression – it maintains the equivalence (that is, obeys all the rules of algebra) but presents the expression (in this case the wage share) in a different “view”.
So we can write as an equivalent:
Wage share – (W/P).(L/GDP)
Now if you note that (L/GDP) is the inverse (reciprocal) of the labour productivity term (GDP/L). We can use another rule of algebra (reversing the invert and multiply rule) to rewrite this expression again in a more interpretable fashion.
So an equivalent but more convenient measure of the wage share is:
Wage share = (W/P)/(GDP/L) – that is, the real wage (W/P) divided by labour productivity (GDP/L).
I won’t show this but I could also express this in growth terms such that if the growth in the real wage equals labour productivity growth the wage share is constant. The algebra is simple but we have done enough of that already.
That journey might have seemed difficult to non-economists (or those not well-versed in algebra) but it produces a very easy to understand formula for the wage share.
Two other points to note. The wage share is also equivalent to the real unit labour cost (RULC) measures that Treasuries and central banks use to describe trends in costs within the economy. Please read my blog – Saturday Quiz – May 15, 2010 – answers and discussion – for more discussion on this point.
So it becomes obvious that the correct statement is that the real wage has to keep pace with productivity growth for the wage share to remain constant. If the nominal wage (W) and the price level (P) are growing at the pace the real wage is constant. And if the real wage is growing at the same rate as labour productivity, then both terms in the wage share ratio are equal and so the wage share is constant.
The wage share was constant for a long time during the Post Second World period and this constancy was so marked that Kaldor (the Cambridge economist) termed it one of the great “stylised” facts. So real wages grew in line with productivity growth which was the source of increasing living standards for workers.
The productivity growth provided the “room” in the distribution system for workers to enjoy a greater command over real production and thus higher living standards without threatening inflation.
Since the mid-1980s, the neo-liberal assault on workers’ rights (trade union attacks; deregulation; privatisation; persistently high unemployment) has seen this nexus between real wages and labour productivity growth broken. So while real wages have been stagnant or growing modestly, this growth has been dwarfed by labour productivity growth.
The following blogs may be of further interest to you:
The tax revenue a government receives importantly constrains the real spending capacity of a sovereign government.
The answer is True.
The answer is true but not for the reasons the mainstream economics textbooks would suggest – that is, that taxation revenue finances government spending.
To understand this we need to explore the role that taxation plays in a fiat monetary system and to note that the question talks about real spending capacity (the capacity to purchase real goods and services) rather than nominal spending capacity (the capacity to spend dollars).
Clearly, I was tempting the reader to follow a logic such that – Modern Monetary Theory (MMT) shows that taxpayers do fund anything and sovereign governments are never revenue-constrained because they are the monopoly issuers of the currency in use. Therefore, the government can spend whatever it likes irrespective of the level of taxation. Therefore the answer is false.
But, that logic while correct for the most part ignores the underlying role of taxation.
In a fiat monetary system the currency has no intrinsic worth. Further the government has no intrinsic financial constraint. Once we realise that government spending is not revenue-constrained then we have to analyse the functions of taxation in a different light. The starting point of this new understanding is that taxation functions to promote offers from private individuals to government of goods and services in return for the necessary funds to extinguish the tax liabilities.
In this way, it is clear that the imposition of taxes creates unemployment (people seeking paid work) in the non-government sector and allows a transfer of real goods and services from the non-government to the government sector, which in turn, facilitates the government’s economic and social program.
The crucial point is that the funds necessary to pay the tax liabilities are provided to the non-government sector by government spending. Accordingly, government spending provides the paid work which eliminates the unemployment created by the taxes.
This train of logic also explains why mass unemployment arises. It is the introduction of State Money (government taxing and spending) into a non-monetary economics that raises the spectre of involuntary unemployment. For aggregate output to be sold, total spending must equal total income (whether actual income generated in production is fully spent or not each period). Involuntary unemployment is idle labour offered for sale with no buyers at current prices (wages).
Unemployment occurs when the private sector, in aggregate, desires to earn the monetary unit of account, but doesn’t desire to spend all it earns, other things equal. As a result, involuntary inventory accumulation among sellers of goods and services translates into decreased output and employment. In this situation, nominal (or real) wage cuts per se do not clear the labour market, unless those cuts somehow eliminate the private sector desire to net save, and thereby increase spending.
The purpose of State Money is for the government to move real resources from private to public domain. It does so by first levying a tax, which creates a notional demand for its currency of issue. To obtain funds needed to pay taxes and net save, non-government agents offer real goods and services for sale in exchange for the needed units of the currency. This includes, of-course, the offer of labour by the unemployed. The obvious conclusion is that unemployment occurs when net government spending is too low to accommodate the need to pay taxes and the desire to net save.
This analysis also sets the limits on government spending. It is clear that government spending has to be sufficient to allow taxes to be paid. In addition, net government spending is required to meet the private desire to save (accumulate net financial assets). From the previous paragraph it is also clear that if the Government doesn’t spend enough to cover taxes and desire to save the manifestation of this deficiency will be unemployment.
Keynesians have used the term demand-deficient unemployment. In our conception, the basis of this deficiency is at all times inadequate net government spending, given the private spending decisions in force at any particular time.
Accordingly, the concept of fiscal sustainability does not entertain notions that the continuous deficits required to finance non-government net saving desires in the currency of issue will ultimately require high taxes. Taxes in the future might be higher or lower or unchanged. These movements have nothing to do with “funding” government spending.
To understand how taxes are used to attenuate demand please read this blog – Functional finance and modern monetary theory.
So to make the point clear – the taxes do not fund the spending. They free up space for the spending to occur in a non-inflationary environment.
You might say that this only applies at full employment where there are no free resources and so taxation has to take those resources off the non-government sector in order for the government to spend more. That would also be a true statement.
But it doesn’t negate the overall falsity of the main proposition.
Further, you might say that governments can spend whenever they like. That is also true but if it just kept spending the growth in nominal demand would outstrip real capacity and inflation would certainly result. So in that regard, this would not be a sensible strategy and is excluded as a reasonable proposition. Moreover, it would not be able to expand its real spending (which requires output to rise).
The following blogs may be of further interest to you: